ROCKEN TECH FUEL INJECTION PUMP TEST BENCHES

Rocken Tech custom test benches are available in 7.5kW (10hp), 11kW
(15hp) and 15kW (20hp), 18.5kW (25ph), 22kW (30hp) and 37kW (50hp).

The test benches can perform testing for pumps such as BOSCH in line
type K, M, MW, A, B, BV, P and BOSCH rotary distributor injection pumps
EP/VA, EP/VM, VE, F…. We also fabricate test benches for testing electronic
pumps and injectors such as
common rail system and EUI / EUP. Rocken
Tech equipment applies latest technologies using advanced parts from
specialty components manufacturers from our partners through the United
States, West Europeans and Asia especially in the area of electronic
sensors, hardwares and softwares.
Fuel Injection Test Benches
Other parts include various test injectors, pump (mounting) fixtures
(holders), motors, internal electrical/electronic parts, coupling, pump
connectors, cooling units, flywheels, fuel connectors, gauges, manual
speed switch, filter, and internal air compressor, etc.

Test injectors:
Please see list on lower part of page  Injectors

High pressure fuel lines:
Please go to the fuel line section for our fuel line products including
selections in various lengths, materials, custom forms, swedged ends,
3-way splitters, and end plugs.

Tools:
Travel distance dial gauge and holder, angle gauge set, also other pump
repair tools, see
Tooling Section.

Common rail test kit:
Model RT-CR-KIT is a universal common rail system test kit. It applies to
most common rail systems with unique adjustable pressure and
electrical input setting that can accommodate various systems from
different manufacturers. Electronic simulator/controls will be provided for
testing. See our
Rail system page for details.

Custom unit Injector / EUI test kit:
Model RT-UI-KIT / RT-UI-E-Kit are testing kits for unit injector and EUI
systems. Electronic simulators are provided for EUI and HEUI testing.
Seeour
Custom Cambox page for details
50 HP test stand for 16-cylinder heavy duty
large diesel pumps shown with special
custom built brackets.
50 HP heavy duty
test bench with
computerized
control and display
for high pressure
common rail
system tests used
for ships and other
equipment.
Custom Unit Injector /
EUI test kit:
Model RT-UI-KIT /
RT-UI-E-Kit
Couplings for test benches
Pump fixtures (holders)    
Glass graduates in 45, 150
and 260 ml (cc).  See above
Accessories and spare parts
section.
2-gauge set for angle and rack travel
distance measurements (manual).
Common rail injector test stand:
Model RT-CR-INJ-01 is a test stand for testing all
the parameters of common rail injectors from
Bosch, Delphi and others. Please click here to see
a
demonstration video of this test stand.
Also available oil pump
test stand
Model ROT-8000  is a test
stand for testing all the
parameters for lubricant  
oil pumps.
Optional advanced
computerized display
system, model:
RTACD
with movable cart.
Also available for
option of integral
electronic graphical
virtue real time fuel
measurement system
using German /
European made flow
meters and
distributors with
combined software.
Fabrication of pressure gauge
unit for measuring fuel output
pressure off the pump or
EUI/EUP while being tested -
option for test bench
Glass graduates (45ml)
(12 pack, also available individually.
Please
contact us for more information)
Model: RGT45-CP
Glass graduates (150ml)
(12 pack, also available individually.
Please
contact us for more information)
Model: RGT150-CP
Glass graduates (260ml)
(12 pack, also available individually.
Please
contact us for more information)
Model: RGT260-CP
Gauge, dial gauge/indicator for travel distance
1/10 mm increments, 0-30 mm, corresponding
# 1 687 233 015
Model: RTTDG-30-1/10
Gauge, dial gauge/indicator for travel distance,
digital type with accessories and
case,0-12.7mm/0.5", 0.001mm/0.0005"
increments
Model: RTTDG-DIGITAL
Please check here for new style computerized
control and display for testing high pressure
common rail system with various features
Independent stand alone electronic fuel
measurement unit with graphical virtue real time
display and control using German / European
made advanced high accuracy flow meters and
distributors - to replace the glass graduates unit
on an existing test bench. Since it has its own
stroke control, it can also be used on our
common rail test only test bench / stand for
expending the features that will be able to test the
in-line and rotary pumps.
Model:
RTEFC12-A-IND
Independent stand alone glass graduates test
unit. Since it has its own stroke control, it can also
be used on our
common rail test only test bench /
stand for expending the features that will be able to
test the in-line and rotary pumps.
Model:
RTGFC12-IND
Newly developed software (partially displayed above) for electronic virtue
graphical real time fuel delivery display option instead of glass graduates
for accuracy measurements using high tech flow meters and distributors.