Rocken Tech Heavy Duty Motor Driven Engine Stand
Model: RTES-MD-L12
For completed engine overhaul, assembly and disassembly with 90° turn
for easy access.
Specifications:
1) Rated load: 26,432 lbs (12,000 Kg) Max.
2) Rotating angle: 90°
3) Rotating center height: 70.9” (1,800 mm)
4) Rotating speed: 1.2 rpm (approx.)
5) Max. off-center load: 7.9” (200 mm) - Actual distance may vary
6) Electrical control: Point turning control, via instrument panel
and remote
7) Dimensions: 286”L x 77” W x 93” H
(7250 L x 1950 W x 2340 H)
Rocken Tech Mid-heavy Duty Motor Driven Engine Stand
Model: RTES-MD-L6
Specifications:
1) Rated load: 13,216 lbs (6,000 Kg) Max.
2) Rotating angle: 90°
3) Rotating center height: 59” (1,500 mm)
4) Rotating speed: 1.2 rpm (approx.)
5) Max. off-center load: 7.9” (200 mm) - Actual distance may vary
6) Electrical control: Point turning control, via instrument panel
and remote
7) Dimensions: 252” L x 75” W x 81” H
(6400 L x 1890 W x 2050 H)
Rocken Tech Medium - Light Truck Motor Driven Engine Stand
with Test Run Features
Model: RTES-MD-L
Specifications:
1) Input Power: 29.5 HP (22 kW)
2) Engine test run speeds: 235 / 400 / 700 rpm
3) Work Speed: 270 / 650 rpm
4) Output Shaft Torque: 1,071 lb-ft (1452 Nm) (Approx.)
5) Load on Connecting Disk: 4,849 lbs (2,200 kg) Max.
6) Overall Dimensions: 115” L x 45 1/2” W x 53 1/4” H
(2900 L x 1150 W x 1350 mm H)
7) Weight: 3,194 lbs (1,450 kg)
8) Load Lift Weight: 5,507 lbs (2,500 kg) Max.
Features:
1. Provides three speeds for test running engines in cold and hot drive
conditions
2. 360° whole engine low speed rotation with connecting disc when
engine weight is lower than 2,000 Kg.
3. Engine (of 2-ton) mounting position angle choice: Any of 360°
4. On-stand threaded bolts for adjusting/alignment of the stand axle
with engine shaft center for test running purposes.
5. Equipped with gear shift device to accommodate main drive speed
changes
6. Provided with gauges and instruments of power and speed for
monitoring gas or diesel engine test running in non-load environment.
Please email or fax any custom specifications, or contact us by clicking
Contact Us
Model: RTES-MD-L12
For completed engine overhaul, assembly and disassembly with 90° turn
for easy access.
Specifications:
1) Rated load: 26,432 lbs (12,000 Kg) Max.
2) Rotating angle: 90°
3) Rotating center height: 70.9” (1,800 mm)
4) Rotating speed: 1.2 rpm (approx.)
5) Max. off-center load: 7.9” (200 mm) - Actual distance may vary
6) Electrical control: Point turning control, via instrument panel
and remote
7) Dimensions: 286”L x 77” W x 93” H
(7250 L x 1950 W x 2340 H)
Rocken Tech Mid-heavy Duty Motor Driven Engine Stand
Model: RTES-MD-L6
Specifications:
1) Rated load: 13,216 lbs (6,000 Kg) Max.
2) Rotating angle: 90°
3) Rotating center height: 59” (1,500 mm)
4) Rotating speed: 1.2 rpm (approx.)
5) Max. off-center load: 7.9” (200 mm) - Actual distance may vary
6) Electrical control: Point turning control, via instrument panel
and remote
7) Dimensions: 252” L x 75” W x 81” H
(6400 L x 1890 W x 2050 H)
Rocken Tech Medium - Light Truck Motor Driven Engine Stand
with Test Run Features
Model: RTES-MD-L
Specifications:
1) Input Power: 29.5 HP (22 kW)
2) Engine test run speeds: 235 / 400 / 700 rpm
3) Work Speed: 270 / 650 rpm
4) Output Shaft Torque: 1,071 lb-ft (1452 Nm) (Approx.)
5) Load on Connecting Disk: 4,849 lbs (2,200 kg) Max.
6) Overall Dimensions: 115” L x 45 1/2” W x 53 1/4” H
(2900 L x 1150 W x 1350 mm H)
7) Weight: 3,194 lbs (1,450 kg)
8) Load Lift Weight: 5,507 lbs (2,500 kg) Max.
Features:
1. Provides three speeds for test running engines in cold and hot drive
conditions
2. 360° whole engine low speed rotation with connecting disc when
engine weight is lower than 2,000 Kg.
3. Engine (of 2-ton) mounting position angle choice: Any of 360°
4. On-stand threaded bolts for adjusting/alignment of the stand axle
with engine shaft center for test running purposes.
5. Equipped with gear shift device to accommodate main drive speed
changes
6. Provided with gauges and instruments of power and speed for
monitoring gas or diesel engine test running in non-load environment.
Please email or fax any custom specifications, or contact us by clicking
Contact Us
 | |  | |  |
Engine Stands
